Sku: M04A

Hand dryer, sensor operated, Smartflow, metal cover, enamelled, white

Hand dryer, sensor operated, Smartflow, metal cover, enamelled, white
£109 69
Excluding VAT: £109.69
Shipping costs Ship to:

Description

Description:
• Warm air hand dryer.
• Sensor operated by hand approximation.
• Suitable for medium traffic facilities.
• Compact, small size.
• Highest durability in its class.
• It normally goes along with a soap dispenser.
Technical characteristics:
• White ABS thermoplastic one-piece cover, 3 mm thick. Cover fixed to the base by means of 2 metal sheet screws.
• Thermoplastic PP + talcum base, with 4 Ø 6 mm holes for wall mounting (screws and wall plugs are provided).
• Universal brush motor, 15.000 rpm, class B, includes a self-resetable thermal cut-off at 100 ºC.
• PP UL94-V0 helicoidal fan wheel.
• Waved Ni-Cr wire heating element that incorporates a self-resetable thermal cut-off at 95 ºC.
• Adjustable (5-20 cm) IR electronic detection sensor.
• IR Sensor with PC viewing screen.

Place the hands under the air outlet grill. The dryer will start automatically, and go on with no interruption as long as the hands be kept in the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the airflow.

Voltage 220-240 V
Frequency 50/60 Hz
Electrical insulation Class II
Dimensions 258x 145x 138 mm
Weight 1.2 kg
Flow-effective! 96 m³ / h / 1,600 l / min
Nominal flow 110 m³ / h 1833 l / min
Air-speed! 85 Km / h
Total power 1.100 W
Engine 150 W
Power-resistance! 950 W
Consumer 4,8 A
r.p.m. 15,000
T. air (D = 10 cm / T amb = 21 º C) 47 º C
Noise level (2 m) 60 dB
Protection-Index! IP23
Ideal location

   Between sink and door. It is recommended not to install between sink, or next to urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.

£109 69