Sku: E05AC

Hand dryer, sensor operated, Saniflow, stainless steel, bright finish

Hand dryer device for hospitals, health centres and public places with high influx of people. It activates automatically just by approaching your hands. Made of stainless steel with bright finishing to provide greater resistance and strength.
€498 99
Excluding VAT: €405.68
Shipping costs Ship to:

Description

  • Hand dryer, warm air.
  • Automatic activation when hands are passed under.
  • Maximum strength and power.
  • Maximum anti-vandalism.
  • Suitable for toilets of high frequency.
  • Usually accompanied by a soap dispenser.
  • Housing, one-piece stainless steel AISI 304, bright finish, 1.5 mm thick. Subject to the base by 2 screws anti-vandal security and lock with special key provided Saniflow ®.
  • Base, Aluminum 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
  • Scroll plastic UL 94-V0 flame retardant.
  • Motor, Universal, 5500 rpm, Class F, includes thermal limiting, with sealed ball bearings and self lubricating.
  • Centrifugal, double-entry symmetric aluminum.
  • Resistance, undulating wire of NiCr, incorporates a thermal limiter.
  • Nozzle, chrome zamak, thickness 22 μm.
  • Electronic detection sensor, infra-red beam, adjustable sensing distance.
Voltage 220-240 V
Frequency 50 / 60 Hz
Electrical insulation Class I
Dimensions 245x 276x 210 mm
Weight 4.65 kg
Effective airflow 330 m3 / h / 5500 l / min
Nominal flow rate 470 m3 / h / 7800 l / min
Air speed 96 Km / h
Total power 2250 W
Engine 250 W
Power Resistance 2000 W
Consumption 10 A
r.p.m. 5500
T. air (D = 10 cm / T amb = 21 º C) 53 º C
Noise level (2 m) 70 dB
Index protection IP23
Ideal location

Between sink and door. It is recommended not to install between sink, or next to urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.

€498 99