Sku: E88ACS

Hand dryer, sensor operated, Saniflow, chromed, satin finish

Hot air hand dryer for bathrooms in health centres, clinics and companies. It is automatically activated just by approaching your hands to the dryer. It provides an optimal drying after washing your hands.
€590 99
Excluding VAT: €480.48
Shipping costs Ship to:

Description

Description:
•Warm air hand dryer.
•Sensor operated.
•Maximum power and airflow.
•Maximum robustness and vandal-proof.
•Suitable for very high traffic facilities.
•It normally goes along with a soap dispenser.
Technical characteristics:
• Steel one-piece cover chromed satin finish, 1,5 mm thick. Cover fixed to the base by means of 2 vandal-proof lock screws and lock with special Saniflow ® wrench.
• Base in aluminium, 3 mm thick, with 4 Ø 8 mm holes for wall mounting.
• Fire resistant plastic UL 94-VO fan scroll.
• Universal brush motor, 5.500 rpm, B class, included a 2 A fuse with sealed and self-lubricated ball bearings.
• Aluminium centrifugal double symmetrical inlet fan wheel.
• Waved wire NiCr heating element on a mica frame that incorporates a self-resetable thermal cut-off at 80 ºC.
• Nozzle in chrome plated zamak, 22 μ thick.
• Two distances (15/25 cm) IR electronic detection sensor.

Place the hands under the air outlet grill. The dryer will start automatically, and go on with no interruption as long as the hands are kept in the detection range of the sensor. The appliance will stop 2 seconds after the hands are removed from the airflow.


Voltage 220-240 V
Frequency 50/60 Hz
Electrical insulation Class I
Dimensions 248x 278x 210 mm
Weight 6.5 Kg
Effective airflow 330 m³ / h / 5,500 l / min
Nominal flow rate 470 m³ / h / 7800 l / min
Air speed 96 Km / h
Total power 2250 W
Engine 250 W
Power Resistance 2000 W
Consumption 10 A
r.p.m. 5500
T. air (D = 10 cm / T amb = 21 º C) 53 º C
Noise level (2 m) 70 dB
Index protection IP23
Ideal location

Between sink and door. It is recommended not to install between sink, or next to urinals, toilets and showers. On automatic models, when installed on a marble ledge, the minimum distance from the dryer to the ledge must be 400mm. It is recommended that hand dryers be distributed throughout the basin area to avoid overcrowding.

€590 99